Call Back Function (For The Trunking Operation) - Icom IC-F5400DP Series Operating Manual

7
dPMR™ OPERATION

Call Back function (For the Trunking operation)

The Call Back function automatically sends back an
acknowledgement (Call Back) to the caller station
after receiving an Individual call�
L "Call Back" is displayed on the caller station's
display�
L The called station saves a log in the Incoming list�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Trunking > Call Back)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select "Trunking," then
push [OK]�
3� Push [Up] or [Down] to select "Call Back," then
push [OK]�
4� Push [Up] or [Down] to select "ON," then push
[OK] to turn ON the Call Back function�
<Key operation>
Push [Call Back] to turn the Call Back function ON or
OFF�
7-21