Table of Contents
Advertisement
■ Transmitting a call
dPMR operation allows you to make a call to a specific station (In-
dividual call) or to a particular group (Talkgroup call). Other digital
mode transceivers on the channel will not receive a call that does
not match their individual or talkgroup ID and/or CC.
D Transmitting a Voice call
q Rotate [ROTARY SELECTOR], or push one of the memory chan-
nel keys, [MR-CH 1] to [MR-CH 4], to select a desired channel,
Individual ID or Talkgroup ID, depending on the presetting.
w Push [PTT] or [Call] to make a Voice call.
• The LED indicator lights red while transmitting.
• The LED indicator fast blinks orange.
• After an acknowledgement is received, the LED indicator slowly
blinks orange in the audible mode.
Or it goes OFF when no acknowledgement is received.
e Hold down [PTT], then speak into the microphone.
• The LED indicator lights red while transmitting.
r Release [PTT] to receive a response.
t After the communication is finished, push [Clear] to send a 'Dis-
connect' signal to terminate the connection.
dPMR OPERATION
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
Advertisement
Table of Contents
