Dbu Options - ADTRAN Express 5210 User Manual

Frame relay service unit
Table of Contents

Advertisement

DBU Options

Beeper Option
If enabled, the Express 5210 issues an intermittent beep while in
dial backup.
Password Opt
When enabled, the passwords entered in the DBU P
of both the near and far end Express 5210s are required to match
before a dial backup connection can be made. The setting in this
field must also be identical in both units (i.e., they both must be set
to either E
when the 4-Wire SW56 card or DCE card is installed.
DBU Password
Enter the authentication string used for making a dial backup
connection. If P
Express 5210 DBU P
panel entry, see the section Entering Letters Using the Front Panel on
page 11-4 for more information. This selection does not apply
when the 4-Wire SW56 or DCE card is installed.
Daily Lockout
Enable/disable the daily lockout specified by the fields L
S
TART
Lockout Start
Enter the hour that the D
disabled (0 to 23). Only applies if the D
set to E
Lockout End
Enter the hour that the D
reactivated (0 to 23). Only applies if the D
is set to E
Weekend Lock
If enabled, no backup will occur from midnight Friday to midnight
Sunday.
61200208L1-1
or D
NABLED
ISABLED
O
ASSWORD
PT
ASSWORDS
and L
E
.
OCKOUT
ND
AILY
.
NABLE
AILY
.
NABLE
Express 5210 User Manual
Chapter 10. Dial Backup Configuration
ASSWORD
). This selection does not apply
is E
, the near and far end
NABLED
must be identical. If using front
L
begins and dial backup is
OCKOUT
L
AILY
OCKOUT
L
ends and dial backup is
OCKOUT
L
AILY
OCKOUT
fields
OCKOUT
parameter is
parameter
10-3

Advertisement

Table of Contents
loading

Table of Contents