Protocol Options (Protocol Opts); Figure 7-4. Frame Relay Protocol Menu Tree - ADTRAN Express 5210 User Manual

PROTOCOL
PHYSICAL LAYER OPTIONS INTERFACE TYPE
PROTOCOL OPTIONS
ADDRESS TABLE

Protocol Options (PROTOCOL OPTS)

Concentrator Mode (CON MODE)
When set to O
traffic such as voice, remote configuration, and PVC loopback data.
This allows frame relay and internally generated traffic (such as
voice traffic) to travel the same DLCI.
T392
Set the timeout between polling intervals. This parameter needs to
be a few seconds longer than the T391 setting of the attached frame
relay device.
61200208L1-1
FRAME RELAY
BIT RATE (selections depend on
TD CLOCK SOURCE
TRANSMIT IDLE CODE
HARDWARE FLOW CONTROL
CONCENTRATOR MODE
T392
N392
N393
MANAGEMENT DLCI
DTE PORT DLCI
NETWORK DLCI

Figure 7-4. Frame Relay Protocol Menu Tree

, the Express 5210 inspects data for proprietary
FF
Express 5210 User Manual
Chapter 7. DTE Port Configuration
EIA 232
V.35
N
ETWORK speed setting)
INTERNAL
EXTERNAL
FLAGS
ONES
OFF
ON
NO
YES
7-5