Table of Contents
Advertisement
If you are using the front panel, see the section Entering Letters
Using the Front Panel on page 11-4 for instructions.
Trap Mgr Options (TRAP MGR OPTS)
The T
sent by the Express 5210 to the SNMP manager. The table supports
up to five entries, consisting of the following selections:
Trap Manager DLCI (TRAP DLCI)
If the T
parameter identifies the virtual circuit used for all traps generated
by the Express 5210.
Trap Manager IP Address (TRAP IP)
Enter the IP address of the SNMP manager to which the
Express 5210 sends traps.
Trap Manager Port (TRAP PORT)
Enter the Express 5210 port number used to transmit traps to the
SNMP manager.
Support Fragmentation (SUPPORT FRAG)
When running voice applications, this should be enabled. With
fragmentation enabled, large frames are fragmented to maintain
voice quality in the presence of large data frames.
System Name
Enter a descriptive name for the unit. This name can help you
distinguish between different installations. Enter up to 20 alpha-
numeric characters in this field, including spaces and special
characters (such as an underbar). The name is then displayed in the
status bar of the terminal menu. This selection is only available for
the terminal interface.
System Time and Date
Enter time/date information. View this information in the S
S
TATUS
61200208L1-1
M
O
table allows you to designate how traps are
RAP
GR
PTIONS
M
P
RAP
ANAGER
ORT
menu. Time is in 24-hour format (i.e., military time).
Express 5210 User Manual
Chapter 11. System Configuration
is set for N
P
ETWORK
ORT
, this
YSTEM
11-3
Advertisement
Table of Contents
