Table of Contents
Advertisement
Chapter 7. DTE Port Configuration
TD Clock Source (TD CLOCK SRC)
Set the clock source to I
Transmit Idle Code (TX IDLE CODE)
Enable the Express 5210 to transmit F
operating in F
transmit F
Hardware Flow Control
This option determines how the Express 5210 responds to
congestion during DBU operation. The following chart explains
the choices:
Off
On
7-4
NTERNAL
R
protocol, configure this option to
RAME
ELAY
.
LAGS
No flow control is used and the Express 5210 drops
frames during severe congestion.
The Express 5210 varies the DTE TC clock as nec-
essary to relieve congestion.
Express 5210 User Manual
or E
.
XTERNAL
or all O
. When
LAGS
NES
61200208L1-1
Advertisement
Table of Contents
