Terminal Pvc Loopback Selections - ADTRAN Express 5210 User Manual

Terminal PVC Loopback Selections

Select the DLCI of the PVC to be tested from the left-hand side of
the PVC L
following menu items appear on the right-hand side:
Test State
Displays current state of the test on the selected DLCI. Possible
states follow:
•
•
Reset Stats
This selection clears the F
Remain
Amount of time (in minutes) that you want the unit to remain in
test. Enter 0 for a continuous test.
Frames Rx
Number of frames received on the selected PVC during the current
loopback test.
61200208L1-1
terminal menu (shown in Figure 14-3). The
OOPBACK
Active: The test is currently active on this DLCI.
Idle: No test is active on this DLCI.
RAMES
Express 5210 User Manual
Chapter 14. Testing
Figure 14-3. PVC Loopback Menu
and F fields.
R T
X RAMES X
14-3