Main Power Switch - Keurig Eccellenza Momentum Service Manual

Service Manual

Main Power Switch

1.
2.
3.
4.
5.
60
Remove the two screws securing the switch plate at the rear of the machine, and then
remove the plate.
Disconnect the wiring from the main power switch.
Compress the clips on each side of the switch, and push it through the opening in the
metal plate (towards the outside).
Insert the new switch into the metal plate, and snap it in place to secure it - make sure
the 'O' it towards the left and the '—' is towards the right.
Connect the wiring to the new power switch.
i. Tab #2 on switch - black wire from service cord (hot).
ii. Tab #1 on switch - white wire from service cord (neutral).
iii. Tab #2a on switch - wire from main harness
iv. Tab #1a on switch - wire from main harness
VKI Publication #202378-001