Service Manual
To install a grinder, follow these same instructions in the reverse order, but please note the
following:
Adjusting the Grinder
The grinder may need to be readjusted periodically. To adjust the grind heads:
1. Using a wrench, loosen the jam nut by turning it counter-clockwise.
2. Turn the adjustment screw clockwise to make the grind finer, or counter-clockwise to
3. Once set, re-tighten the jam nut.
40
Make certain that the hard rubber seal is properly positioned between the
bottom of the coffee dispenser and the top of the grinder.
make the grind coarser.
VKI Publication #202378-001