Removing Dispenser Motors - Keurig Eccellenza Momentum Service Manual

Service Manual

Removing Dispenser Motors

Coffee Motor
1.
2.
3.
To install a coffee dispenser motor, follow these same instructions in the reverse order.
42
The coffee and the powder dispenser motors are the same component, with
the motor coupling configured differently. The coupling can be easily pushed
out of the motor housing with a 9/32 nut driver.
Coffee Motor Configuration
Remove the two screws securing the motor to be replaced to the machine.
NOTE: When re-installing the coffee motor screws, the torque must be 7 in/lbs.
Pull the motor wiring through the hole in the hopper base, and then disconnect the
inline wiring connector for the motor to be removed (red arrow).
Remove the motor(s).
Powder Motor Configuration (default)
VKI Publication #202378-001