Exhaust Fan - Keurig Eccellenza Momentum Service Manual

Service Manual

Exhaust Fan

1.
2.
3.
4.
5.
6.
To install an exhaust fan, follow these same instructions in the reverse order.
62
Remove the waste bin and the floor tray, and open the front door.
Remove the brewer and the grounds chute.
Remove the brewer motor and brewer wiper motor support (see
Remove the two screws securing the panel beneath the grinder, and move the panel
off to the side (leave the ground wires connected to the inside of the panel).
Disconnect the exhaust fan wiring from the control board.
Using a 7/16 nut driver, remove the hex nuts securing the exhaust fan to the right side
wall of the machine, and remove the fan.
page 33).
VKI Publication #202378-001