Service Manual
Removing a Wiper Motor Switch
1.
2.
3.
4.
To install the wiper motor switch, follow these same instructions in the reverse order.
36
Remove the wiper motor assembly.
Remove the screw and washer securing the wiper arm to the wiper motor assembly.
NOTE: When re-installing this screw, the torque must be 22 in/lbs.
Remove the wiper arm.
Unclip the switch to be replaced from its support, and pull the wiring through the hole
in the support to remove it.
Prior to replacing the wiper arm, apply a liberal
amount of food-grade grease to the center of it.
VKI Publication #202378-001