Service Manual
Removing Inlet Valve
1.
2.
3.
To install an inlet valve, follow these same instructions in the reverse order.
58
With the water source disconnected and the rear panel removed, remove the circle
clamp by twisting it open with a flat head screwdriver, and then remove the hose from
the inlet valve.
Disconnect the wiring from the inlet valve.
Remove the two screws securing the inlet valve to the rear of the machine and then
remove the valve.
When installing a new inlet valve, always secure the hose to the valve with a
properly installed circle clamp.
VKI Publication #202378-001