Event Deactivation - Keurig Eccellenza Momentum Service Manual

Event Deactivation

The Event Deactivation tab allows you to deactivate any of the error messages that can
potentially appear should the system detect a fault.
To deactivate a particular error message:
1. Select the required component from the list of components. The table below identifies
the component code.
a. Once a component is selected, the list of related error messages for this
Selected
Component
List of related
error messages
CODE
B1 Blower (Powders)
D2 Waste Bin Detection
D3 Door Open Detection
D6 Cup Detection
G1 Grinder
H1 Heating Element
K1 Exhaust Fan
L4 Normal Water Level Detection
L5 Safety Water Level Detection
L9 Waste Bin Full Detection
MDB1 Vending Devices
M1 Powder 1 Motor
M2 Powder 2 Motor
VKI Publication #202378-001
Deactivating error messages allows the equipment to continue to operate
with a defective component, as a fault notification is not displayed. This, in
turn, may cause further damage to the equipment and/or its surroundings.
component is displayed under the "Event Name" heading.
COMPONENT
Eccellenza Momentum™
CODE COMPONENT
M3 Powder 3 Motor
M4 Powder 1 Whipper Motor
M5 Powder 3 Whipper Motor
M6 Coffee 1 Motor
M7 Coffee 2 Motor
M8 Coffee 3 Motor
M9 Brewer Motor
M10 Brewer Wiper Motor
M11 Powder 2 Whipper Motor
S1 Cup Lighting
T1 Temperature Probe
Z99 Various Components
23