Replacing The Powder Blower - Keurig Eccellenza Momentum Service Manual

Service Manual

Replacing the Powder Blower

1.
2.
3.
50
Remove the following whipper components:
a) Disconnect the three powder hoses.
b) Remove the three whipper steam traps.
c) Remove the three mixing chambers.
Remove the three screws securing the whipper support, and then place the bracket on
the floor of the machine.
Disconnect the inline power connector to the blower, and remove the two plastic wing
nuts securing the blower to its support.
VKI Publication #202378-001