Powder Rinse - Keurig Eccellenza Momentum Service Manual

Service Manual

Powder Rinse

After servicing the whipper system, you'll need to perform a 'Powder Rinse' to flush powder that
may have fallen into any of the three whippers.
1.
2.
This option runs a rinse cycle (to clean all three of the powder whipper systems) by sending hot
water through each of the whipper units, while at the same time activating each of the whipper
motors.
52
Go to the 'Maintenance' screen and select the 'Cleaning & Sanitizing' tab.
Tap the 'Mixers Rinse' option to activate it.
Place a cup on the cup stand prior to running this cycle as up to 12-oz of
water will be dispensed once the cycle is activated.
VKI Publication #202378-001