Tower Model; Installing The Front Cover - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.3

Tower model

4.5.3.1

Installing the front cover

Figure 22: Installing the front cover (tower server) (A)
Ê Hook the two tabs of the front cover into the notches in the chassis.
Figure 23: Installing the front cover (tower server) (B)
Ê Fold down the front cover (1) until the locking clip on the bottom edge
engage (2).
Ê Insert and slide the ID card into its slot until it locks in place (see figure
on page 61.)
70 Upgrade and Maintenance Manual
14
TX150 S8 / TX200 S7