Main Memory - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

10

Main memory

Safety notes
V
CAUTION!
Do not install unsupported third party memory modules. For further
●
information on supported memory modules, refer to section
information" on page
Memory modules remain hot after shutdown. Wait for components to
●
cool down before installing or removing memory modules to prevent
burns.
Do not insert and remove memory modules repeatedly. Doing so may
●
cause failures.
Pressing out the securing clips on the memory slot will eject the
●
installed memory module. To prevent damage and injuries eject
memory modules carefully without applying excessive force.
For further information, please refer to chapter
●
information" on page
TX150 S8 / TX200 S7
244.
35.
Upgrade and Maintenance Manual
"Basic
"Important
243