Concluding Steps; Software Configuration - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

System board and components

14.3.3.4 Concluding steps

"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
"Enabling SVOM boot watchdog functionality" on page 94
Ê
"Enabling BitLocker functionality" on page 100
Ê

14.3.3.5 Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
360 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7