Converting A Tower Model To A Rack Model; Preliminary Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

15 Converting a tower model to a
rack model
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Safety notes
For further information, please refer to chapter
page 33.
15.1

Preliminary steps

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
Ê Remove all external cables.
"Getting access to the component" on page 49
Ê
front cover" on page 59
I
The front cover is no longer required.
"Removing the anti-tilt bracket" on page 75
Ê
TX2540 M1
Upgrade and Maintenance Manual
Hardware: 20 minutes
"Important information" on
including "Removing the
379