Processors - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

11

Processors

Safety notes
V
CAUTION!
Do not install unsupported processors. For further information on
●
supported processors, refer to section
page 254.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
When removing or installing processors, be careful not to touch or
●
bend the spring contacts on the processor sockets.
Never touch the underside of the processors. Even minor soiling such
●
as grease from the skin can impair the processor's operation or
destroy the processors.
For further information, please refer to chapter
●
information" on page
TX150 S8 / TX200 S7
35.
Upgrade and Maintenance Manual
"Basic information" on
"Important
253