Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual page 214

Expansion cards and backup units
Figure 143: Installing the expansion card (B)
Ê Clip on the PCI slot bracket clamp (1).
Ê Fold down the locking handle on the PCI slot bracket clamp until it locks in
place (2).
Figure 144: Connecting cables to the expansion card
Ê If applicable, connect internal cables to the expansion card (see section
"Cabling plans" on page
V
CAUTION!
Ensure that the RAID controller is not deformed.
214
405).
Upgrade and Maintenance Manual
TX150 S8 / TX200 S7