Concluding Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 69: Inserting the 2.5-inch HDD / SSD module
Ê Insert the HDD / SSD module into a drive bay and carefully push back as far
as it will go.
Ê Close the locking lever to lock the hard disk drive in place.
7.2.3.4

Concluding steps

"Installing accessible drive and HDD bay covers" on page 71
Ê
"Performing a RAID array rebuild" on page 101
Ê
144 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7