Installing The New Sas Backplane; Concluding Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

7.2.6.3

Installing the new SAS backplane

Figure 74: Installing the 2.5-inch HDD SAS backplane
Ê At a slight angle, fit the SAS backplane into the two guides on the HDD cage
(1).
Ê Fold down the SAS backplane (2).
Ê Secure the SAS backplane with the two screws (see figure 72).
Ê Connect the power cable and the SAS cable to the SAS backplane (see
figure 72).
7.2.6.4

Concluding steps

"Installing the system fan holder" on page 77
Ê
"Reassembling" on page 64
Ê
"Installing a 2.5-inch HDD / SSD module" on page 143
Ê
inch HDD / SSD dummy module" on page
I
For detailed information on HDD mounting order, refer to section
inch HDD / SSD configurations" on page
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
147.
138.
and "Installing a 2.5-
"2.5-
151