4.3
Replacing processors
V
CAUTION!
Make sure you observe the safety notes in the
instructions" on page
You can install one or two processors in the PRIMERGY BX620 S6
server blade.
V
CAUTION!
Always use processors of the same type. All processors must have
the same frequency and cache size. For multi-processor mode use a
suitable multi-processor operating system.
Never touch the processor core.
The thermal paste must be intact for mounting the processor.
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Requirements
– The server blade has been removed from the basic unit.
– The cover of the server blade has been removed.
BX620 S6
13.
Service Supplement
Replacing processors
chapter "Safety
23