Fortigate Ipv6 Support - Fortinet FortiGate FortiGate-60M Administration Manual

System network

FortiGate IPv6 support

FortiGate-60M Administration Guide
You can assign both an IPv4 and an IPv6 address to any interface on a FortiGate unit.
The interface functions as two interfaces, one for IPv4-addressed packets and
another for IPv6-addressed packets.
FortiGate units support static routing, periodic router advertisements, and tunneling of
IPv6-addressed traffic over an IPv4-addressed network. All of these features must be
configured through the Command Line Interface (CLI). See the FortiGate CLI
Reference Guide for information on the following commands:
Table 2: IPv6 CLI commands
Feature
Interface configuration, including periodic
router advertisements
Static routing
IPv6 tunneling
01-28007-0144-20041217
CLI Command
config system interface
See the keywords beginning with "ip6".
config ip6-prefix-list
config router static6
config system ipv6_tunnel
FortiGate IPv6 support
73