Fortinet FortiGate FortiGate-60M Administration Manual page 47

Version 2.80 mr7 antivirus firewalls
Hide thumbs Also See for FortiGate FortiGate-60M:
Table of Contents

Advertisement

System network
FortiGate-60M Administration Guide
Figure 6: Interface settings
See the following procedures for configuring interfaces:
To bring down an interface that is administratively up
To start up an interface that is administratively down
To add interfaces to a zone
To add an interface to a virtual domain
To change the static IP address of an interface
To configure an interface for DHCP
To configure an interface for PPPoE
To configure support for dynamic DNS services
To add a secondary IP address
To add a ping server to an interface
To control administrative access to an interface
To change the MTU size of the packets leaving an interface
To configure traffic logging for connections to an interface
Name
The name of the Interface.
Interface
Select the name of the physical interface to add the VLAN subinterface to. All VLAN
subinterfaces must be associated with a physical interface. Once created, the VLAN is
listed below its physical interface in the Interface list.
VLAN ID
Enter the VLAN ID that matches the VLAN ID of the packets to be received by this
VLAN subinterface. You cannot change the VLAN ID of an existing VLAN
subinterface.
01-28007-0144-20041217
Interface
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-60m

Table of Contents