Spam filter
IP address
IP address list
IP address options
FortiGate-60M Administration Guide
4
Select Apply.
You can now enable FortiShield for any firewall protection profile you create. See
"Configuring spam filtering options" on page
Once you select Apply, the FortiShield license type and expiration date appears on
the configuration screen (Spam Filter > FortiShield).
The FortiGate unit uses the IP address list to filter incoming email. The FortiGate unit
compares the IP address of the sender to the list in sequence. If a match is found, the
corresponding protection profile action is taken. If no match is found, the email is
passed on to the next spam filter.
You can enter an IP address and mask in two formats:
•
x.x.x.x/x.x.x.x, for example 62.128.69.100/255.255.255.0
•
x.x.x.x/x, for example 62.128.69.100/24
This section describes:
•
IP address list
•
IP address options
•
Configuring the IP address list
You can configure the FortiGate unit to filter email from specific IP addresses. You
can mark each IP address as clear, spam, or reject. You can filter single IP
addresses, or a range of addresses at the network level by configuring an address
and mask.
Figure 173:Sample IP address list
IP address list has the following icons and features:
Create New
Total
IP address/Mask
Select Create New to add an IP address to the IP address list.
The number if items in the list.
The Page up, Page down, and Remove all entries icons.
The current list of IP addresses.
01-28007-0144-20041217
228.
IP address
329