Cli Configuration; Fortilog Setting - Fortinet FortiGate FortiGate-60M Administration Manual

CLI configuration

CLI configuration

fortilog setting

354
all of the following
any of the following
none of the following
5 In the Keywords field, type the keywords for the search.
6 Select OK.
The log message list shows only the logs that meet your log search criteria.
This guide only covers Command Line Interface (CLI) commands and command
keywords that are not represented in the web-based manager. For complete
descriptions of working with CLI commands see the FortiGate CLI Reference Guide.
Note: The command keywords for fortilog setting that are not represented in the web-
based manager are localid and psksecret.
Use this command to configure log settings for logging to a FortiLog unit.
The FortiLog unit is a log analyzer and manager that can combine the log information
from various FortiGate units.
Command syntax pattern
config log fortilog setting
set <keyword> <variable>
config log fortilog setting
unset <keyword>
get log fortilog setting
show log fortilog setting
log fortilog setting command keywords and variables
Keywords and
variables
encrypt
{enable | disable}
localid <str_id>
The message must contain all of the keywords
The message must contain at least one of the keywords
The message must contain none of the keywords
Description
Enter enable to enable encrypted
communication with the FortiLog unit.
Enter the local ID for an IPSec VPN tunnel
to a FortiLog unit. You can create an IPSec
VPN tunnel if one or more FortiGate units
are sending log messages to a FortiLog
unit across the Internet. Using an IPSec
VPN tunnel means that all log messages
sent by the FortiGate are encrypted and
secure.
01-28007-0144-20041217
Log & Report
Default Availability
disable All models.
No All models.
default.
Fortinet Inc.