Installing Firmware Images From A System Reboot Using The Cli - Fortinet FortiGate FortiGate-60M Administration Manual

Changing the FortiGate firmware
10

Installing firmware images from a system reboot using the CLI

38
9 To confirm that the new firmware image has been loaded, enter:
get system status
To restore your previous configuration if needed, use the command:
execute restore config <name_str> <tftp_ipv4>
11 Update antivirus and attack definitions.
For information, see
the CLI, enter:
execute update_now
This procedure installs a specified firmware image and resets the FortiGate unit to
default settings. You can use this procedure to upgrade to a new firmware version,
revert to an older firmware version, or re-install the current firmware version.
Note: This procedure varies for different FortiGate BIOS versions. These variations are
explained in the procedure steps that are affected. The version of the BIOS running on the
FortiGate unit is displayed when you restart the FortiGate unit using the CLI through a console
connection.
For this procedure you:
• access the CLI by connecting to the FortiGate console port using a null-modem
cable,
• install a TFTP server that you can connect to from the FortiGate internal interface.
The TFTP server should be on the same subnet as the internal interface.
Before beginning this procedure you can:
• Back up the FortiGate unit configuration.
For information, see
• Back up the IPS custom signatures.
For information, see
page 285.
• Back up web content and email filtering lists.
For information, see
If you are reverting to a previous FortiOS version (for example, reverting from FortiOS
v2.80 to FortiOS v2.50), you might not be able to restore your previous configuration
from the backup configuration file.
Note: Installing firmware replaces the current antivirus and attack definitions with the definitions
included with the firmware release that you are installing. After you install new firmware, use the
procedure "To update antivirus and attack definitions" on page 123
and attack definitions are up to date.
To install firmware from a system reboot
1 Connect to the CLI using the null-modem cable and FortiGate console port.
2 Make sure that the TFTP server is running.
3 Copy the new firmware image file to the root directory of the TFTP server.
"To update antivirus and attack definitions" on page
"Backing up and Restoring" on page
"Backing up and restoring custom signature files" on
"Web filter" on page 311
01-28007-0144-20041217
118.
and "Spam filter" on page
to make sure that antivirus
System status
123, or from
325.
Fortinet Inc.