Traffic Log; Event Log - Fortinet FortiGate FortiGate-60M Administration Manual

Log config
348
Figure 186:Example traffic and event log filter settings

Traffic log

The Traffic Log records all the traffic to and through the FortiGate interfaces. You can
configure logging for traffic controlled by firewall policies and for traffic between any
source and destination addresses. You can also apply global settings, such as
session or packet log. You can apply the following filters:
Policy allowed The FortiGate unit logs all traffic that is allowed according to the firewall
policy settings.
traffic
Policy violation The FortiGate unit logs all traffic that violates the firewall policy settings.
traffic
Note: You can enable traffic logging for specific interfaces or firewall policies. See
traffic logging" on page 350

Event log

The Event Log records management and activity events, such as when a
configuration has changed or a routing gateway has been added. You can apply the
following filters:
System Activity The FortiGate unit logs all system-related events, such as ping server
failure and gateway status.
event
IPSec negotiation The FortiGate unit logs all IPSec negotiation events, such as progress
and error reports.
event
DHCP service The FortiGate unit logs all DHCP-events, such as the request and
response log.
event
01-28007-0144-20041217
for more information.
Log & Report
"Enabling
Fortinet Inc.