IP pool
IP pool list
IP pool options
Configuring IP pools
222
Figure 103:Sample IP pool list
The IP pool list has the following icons and features.
Create New
Start IP
End IP
Figure 104:IP pool options
Virtual IP has the following options.
Interface
Name
IP Range/Subnet Enter the IP address range for the IP pool.
To add an IP pool
1
Go to Firewall > IP Pool.
2
Select the interface to which to add the IP pool.
You can select a firewall interface or a VLAN subinterface.
3
Select Create New.
4
Enter the IP Range for the IP pool.
The IP range defines the start and end of an address range. The start of the range
must be lower than the end of the range. The start and end of the range must be on
the same subnet as the IP address of the interface to which you are adding the IP
pool.
Select Create New to add an IP pool.
The start IP defines the start of an address range.
The end IP defines the end of an address range.
The Delete and Edit/View icons.
Select the interface to which to add an IP pool.
Enter a name for the IP pool.
01-28007-0144-20041217
Firewall
Fortinet Inc.