System network
Interface
FortiGate-60M Administration Guide
FortiGate-60M Administration Guide Version 2.80 MR7
System network settings control how the FortiGate unit connects to and interacts with
your network. Basic network settings start with configuring FortiGate interfaces to
connect to your network and configuring the FortiGate DNS settings.
More advanced network settings include adding VLAN subinterfaces and zones to the
FortiGate network configuration.
•
Interface
•
Zone
•
Management
•
DNS
•
Routing table (Transparent Mode)
•
Configuring the modem interface
•
VLAN overview
•
VLANs in NAT/Route mode
•
VLANs in Transparent mode
•
FortiGate IPv6 support
In NAT/Route mode, go to System > Network > Interface to configure FortiGate
interfaces and to add and configure VLAN subinterfaces.
Note: Unless stated otherwise, in this section the term interface can refer to a physical
FortiGate interface or to a FortiGate VLAN subinterface.
•
For information about VLANs in NAT/Route mode, see
mode" on page
66.
•
For information about VLANs in Transparent mode, see
mode" on page
68.
01-28007-0144-20041217
"VLANs in NAT/Route
"VLANs in Transparent
45