20 SERVICE WORK ON THE ENGINE
20.1
128
Changing the gear oil
Warning
Danger of scalding Gear oil becomes very hot when the motorcycle is operating.
–
Wear suitable protective clothing and safety gloves.
–
If you have been scalded, hold the burn under lukewarm water immediately.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
Drain the gear oil while the motor is warm.
C00745-10
C00748-10
Preparatory work
–
Stand the motorcycle on a horizontal surface using the side
stand.
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the Powerpack HV. (
–
Mount the protection cap. (
Main work
–
Position an appropriate container under the engine.
–
1
Remove oil drain plug
–
2
Remove screw plug
with the seal ring.
–
Let the gear oil drain fully.
p. 43)
p. 108)
p. 71)
with the magnet and seal ring.