Greasing The Mower Deck And Belt Idlers - Toro Z Master Professional 7000 Series Operator's Manual

Greasing the Mower Deck
and Belt Idlers
Service Interval: Every 25 hours—Grease the mower
deck and spindles.
Grease with No. 2 lithium or molybdenum grease.
Important:
Make sure that the cutting-unit
spindles are full of grease weekly.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the belt covers.
4. Grease the fittings on the 3 spindle bearings ().
5. Grease the idler arm on the mower deck ( or ).
6. Grease the fittings on the push arms ( or
42).
Figure 41
52-inch and 60-inch Mower Decks
-
EUTRAL LOCK
7.
8.
Figure
g187362
38
Figure 42
72-inch Mower Deck
Grease the PTO-drive belt idler arm
Grease the pump belt idler arm
Figure 43
g010415
(Figure 43).
(Figure 43).
g007170