Servicing The Gearbox - Toro Z Master Professional 7000 Series Operator's Manual

1. Spring washers
2. Lock nut

Servicing the Gearbox

Checking the Gearbox-Oil Level
Service Interval: Every 100 hours
Use SAE 75W-90 synthetic gear lube.
1. Park the machine on a level surface.
2. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Remove the side or rear plug on the gearbox
(Figure 67).
5. The oil should be up to the opening of the
gearbox.
6. Add oil if needed to bring it to the correct level.
Figure 66
3. Dust cap
EUTRAL
g001297
1. Gearbox
2. Side plug
Changing the Gearbox Oil
Service Interval: After the first 100 hours
Yearly
Contact an Authorized Service Dealer to change the
-
LOCK gearbox oil.
51
Figure 67
3. Pulley
4. Rear plug
g001156