Servicing The Fuel Tank - Toro Z Master Professional 7000 Series Operator's Manual

Changing the Fuel Filter
Never install a dirty fuel filter if it is removed from the
fuel line.
1. Allow the machine to cool down.
2. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Close the fuel shut-off valve
5. Loosen the 2 hose clamps and disconnect the
fuel lines from the fuel filter
6. Install a new filter. Connect the fuel lines to the
fuel filter and install the 2 hose clamps
59).
7. Open the fuel shut-off valve.
8. Start the engine and check for leaks.
Figure 59
1. Fuel filter
2. Hose clamp
3. Fuel pump
-
EUTRAL LOCK
(Figure 59).
(Figure 59).
(Figure
g007697
4. Left side of machine
5. Fuel-shutoff valve

Servicing the Fuel Tank

Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
services any components of the fuel system.
46