Toro Z Master Professional 7000 Series Operator's Manual page 54

1. Position the machine on a level surface, shut off
the engine, and engage the parking brake.
2. Unlatch the seat and tilt the seat up.
3. With the engine cool, check the overflow bottle
level. The fluid needs to be up to the bump on
the outside of the overflow bottle
4. If the coolant level is low, add a 50/50 mix of
extended life antifreeze/Dex-Cool® and water to
the overflow bottle
5. Add the 50/50 coolant mix to the overflow bottle
and fill it to the indicator line on the bottle
71).
Figure 71
1. Antifreeze overflow bottle
(Figure 71).
(Figure 71).
(Figure
2. Indicator line on side of
overflow bottle
Cleaning the Hydraulic-Fluid
Cooler and Radiator Screen
Service Interval: Before each use or daily
Before each use, check and clean the radiator screen
and oil cooler. Remove any build-up of grass, dirt or
other debris from the oil cooler and radiator screen
with compressed air
1. Hydraulic-fluid cooler
2. Left rear tire
g001103
Changing the Engine Coolant
Service Interval: Yearly
Contact an Authorized Service Dealer for changing
the coolant.
54
(Figure 72).
Figure 72
3. Radiator screen
g001104