Greasing The Mower Deck And Belt Idlers - Toro Z Master Professional 7000 Series Operator's Manual

Greasing the Mower Deck
and Belt Idlers
Service Interval: Every 25 hours—Grease the mower
deck and spindles.
Grease with No. 2 lithium or molybdenum grease.
Important:
Make sure that the cutting-unit
spindles are full of grease weekly.
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the belt covers.
4. Grease the idler arm on the mower deck
42).
5. Grease the fittings on the push arms
Figure 42
52-inch and 60-inch Mower Decks
6. Grease the PTO-drive belt idler arm
7. Grease the pump belt idler arm
(Figure
(Figure 42).
g187362
(Figure 43).
(Figure 43).
37
Figure 43
g007170