Figure 102
1. Bolt
2. Spacer
3. Locknut
4. Spring
g002519
5. Spring installed
6. Grass deflector
7. L-end of spring, place
behind deck edge before
installing bolt
8. J-hook end of spring
Cleaning
Cleaning under the Mower
Service Interval: Before each use or daily
Remove the grass buildup under the mower daily.
1.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Raise the mower to the transport position.
Waste Disposal
Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your state and local regulations.
73
-
EUTRAL
LOCK