Product Overview; Controls - Toro Z Master Professional 7000 Series Operator's Manual

Product Overview

1. Height-of-cut deck lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control lever
Controls
Become familiar with all of the controls before you
start the engine and operate the machine
and Figure 5).
1. Hour meter
2. Ignition switch
3. Fuel-selector valve
4. Audible alarm
5. Glow-plug switch
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4
Figure 5
6. Glow-plug light
7. Engine-temperature light
8. Throttle control
9. PTO switch
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly
Battery-Indicator Light
When you turn the ignition key initially to the R
position for a few seconds, the battery voltage is
displayed in the area where the hours are normally
displayed.
g019888
The battery light turns on when you turn on the ignition
and the charge is below the correct operating level
(Figure 6).
1. Safety-interlock symbols
2. Hour meter
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Blade-Control Switch (Power
Takeoff)
g010363
The blade-control switch (PTO) engages and
disengages power to the mower blades
Neutral-Lock Position
The N -
EUTRAL LOCK
safety-interlock system and to determine N
position.
15
5).
(Figure 6).
Figure 6
3. Battery light
LOW
5).
position is used with the
UN
g009610
to F
AST
(Figure 5).
EUTRAL