■
Solution 2
Correct the program and set the home return speed to a slower speed.
15.3.7 Speed Does Not Slow Down for a Home Return
■
Situation
There is a possibility that the near home input has not been read correctly.
■
Solution 1
Forcibly turn the near home input switch ON and OFF from an external source, and check to
see if the near home input display LED "D" on the pulse output unit lights.
■
Solution 2
Check to see if the input valid logic for the near home input switch is normally either ON or OFF.
■
Solution 3
● Check the parameter for home return.
● As a default, the near home input is set to "NO contact". When the near home input is not
connected, the unit processes as the near home input is invalid.
WUME-GM1PG-01
15.3 What to Do If an Error Occurs
15-7