Gear Ratio Chart - FUTABA T10PX Full Manual

The Gear Ratio Chart can be calculated from input values for the number of teeth of
the spur gear and pinion gear and second gear ratio and displayed as a table.
Home screen
Use of Roll out chart function
1
(Setting of number of teeth of spur gear)
Tap the value button of the [Spur]. Value in-
put buttons appear on the screen. Use the [+]
and [-] buttons to set the spur gear. The gear
ratio is then calculated, and the list is updated.
2
(Setting of number of teeth of pinion gear)
Tap the value button of the [Pinion]. Value input buttons appear on the screen. Use the [+]
and [-] buttons to set the pinion gear. The gear ratio is then calculated, and the list is updated.
3
(Setting of number of secondary gear ratio)
Tap the value button of the [2nd gear ratio]. Value input buttons appear on the screen. Use
the [+] and [-] buttons to set the second gear ratio. The gear ratio is then calculated, and the
list is updated.
4
When finished, return to the Accessory menu screen by pressing the HOME button.
ACCESSORY MENU

Gear Ratio Chart

Menu screen Accessory menu screen Gear ratio chart
Return to table of contents
204
Setup item
Pinion
2nd Gear ratio
Spur
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.