FUTABA T10PX Full Manual page 91

SW3 PD2
SW2
SW1
SSW1
SW4
The HOME screen display
When the push switch is operated, the state
of the function is displayed for a few sec-
onds at the top of the screen.
Example:
When the push switch to which ON/OFF of the neutral
brake is assigned is operated.
LINKAGE MENU
Set table functions
PD1 SW5
Abbreviation used on
the setup screen
SW6
Channel 3 to 7 control
Condition 1
Condition (1-5)
SW7
Program mixing (1-5)
A.B.S. (Brake 1)
A.B.S. (Brake 2,3)
Traction control
4WS mixing
4WS type1 (Front)
4WS type2 (Reverse)
4WS type3 (Same)
4WS type4 (Rear)
Dual ESC (Rear)
Dual ESC (4WD)
Dual ESC (Front)
Gyro mixing
Gyro gain
Gyro group
CPS mixing (1-3)
Brake
Start
Engine cut
Idle up
Neutral brake
Timer start
Timer reset
Telemetry speech
Telemetry log
Screen capture
Backlight
OFF
Operation of channel 3 to 7 (Channel 5 to 7 is for S-
FHSS analog system only.)
2 Change between condition 1 and 2
Specify one of conditions 1 to 4
Program mixing (1-5) function ON/OFF
A.B.S function brake 1 (2 channel) ON/OFF
A.B.S function brake 2,3 (Auxiliary channel) ON/
OFF
Traction control function ON/OFF
4WS mixing function ON/OFF & type select
4WS mixing function type1 (Front) select
4WS mixing function type2 (Reverse) select
4WS mixing function type3 (Same) select
4WS mixing function type4 (Rear) select
Dual ESC mixing (Rear Drive mode)
Dual ESC mixing (4WD mode)
Dual ESC mixing (Front Drive mode)
Switching GYRO mode function ON/OFF
Switching GYRO mode (Switch of Gain1 and Gain2
in the same group)
Switching GYRO mode (Switch of Gain group)
CPS up function ON/OFF
Steering mixing (Brake function ON/OFF)
Start function trigger wait ON/OFF
Engine cut function ON/OFF
Idle up function ON/OFF
Neutral brake function ON/OFF
Timer function start/stop
Timer function reset
Telemetry voice guide ON/OFF
Telemetry data logging ON/OFF
Save images of the currently displayed screen to
microSD card.
LCD backlight ON
Not used
Return to table of contents
91
Push switch ：SW1-SW7
Slide switch ：SSW1
Paddle switch ：PD1 PD2
Steering switch ：SS
Trigger switch ：TS
Function name, etc
Neutral brake ON/OFF is indi-
cated on the home screen for
a few seconds.