Cps Mixing (1, 2, 3 ) - FUTABA T10PX Full Manual

This function controls the Futaba CPS-1 channel power switch. Usually, when us-
ing the CPS-1 unit to light the vehicle dress-up and other illumination (LED) the
CPS-1 unit with LED connected is connected to a vacant switch channel and the
the "
"
The CPS-1 unit does not operate in SR mode. When using the T-FHSS SR system,
connect it to the channel of the normal mode.
Home screen
CPS mixing adjustment
(Preparation)
- CPS-1 unit connects to the receiver's auxiliary channel.
- When the LEDs are turned on and off by a switch, use the
function select switch function (Linkage menu) to set the
switch to be used.
- From the CPS Mixing screen, tap [CPS Mixing 1]/[CPS Mixing
2] or [CPS Mixing 3] to display the setting screen.
1
(Function ON/OFF)
Tap "Mixing" (ON) or (OFF) to select ON/OFF.
"OFF": Mixing function OFF
"ON": Mixing function ON
MIXING MENU
CPS Mixing (1, 2, 3 )
Menu screen
Menu-1
CPS function ON/OFF
i s i n d i c a t e d o n t h e
home screen for a few
seconds.
Mixing menu
Menu-2
be used. When the number of channels is
Return to table of contents
144
-
CPS mixing
-
Setting
- Tap (ON)/(OFF).