Flow Chart - FUTABA 6EXHP Instruction Manual

To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
������ ���� ��� ������ ���� ��� ��� �������
����
���
Simultaneously Press the "MODE" and "SELECT" keys and hold them down for one second to enter the programming
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
FLOW CHART 6EXHP FUNCTIONS
(Screen at Startup)
������ ����
��� ����
��� ����
��� ����
�����
�����
�����
�����
��� ����
20
To change the Stick Mode, turn on
the transmitter holding MODE and
SELECT keys down simultaneously.
Use the DATA INPUT lever to display
the desired stick mode.
���� ���
������ ���
���� �����
�����
��� ���� ����
����� ����