Panasonic SC-HG1 Series Reference Manual page 97

Item
Description of
functions
FB compilation
method
FB behavior
i_bEN input condition
When Execution Command (i_bEN) is turned ON, this FB executes the preset on the controller
specified by Set Controller (i_uSetController) in accordance with the value input to Preset Value
(i_dPresetData). If Execution Command (i_bEN) is turned ON with the Reset Flag (i_bReset) ON,
the preset is reset.
When Execution Command (i_bEN) is turned ON with Read Flag (i_bReadFlag) ON, however, the
preset values stored in all the connected controllers are output to Read Preset Data
(o_d15ReadPresetData). In this case, the values input to Set Controller (i_uSetController), Preset
Value (i_dPresetData), and Reset Flag (i_bReset) are ignored and no setting takes place.
Macro type
Pulse execution type (multi-scan execution type)
None
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Description
97/184
WUME-SCHG1IQRFB-1