Panasonic SC-HG1 Series Reference Manual page 174

(h) P+SUNX-SC-HG1_SetLeverRatio_R (lever ratio setting)
When M0 is turned ON, this FB sets the lever ratio to 2.0 on the first and second controllers connected to the SC-HG1-C with
its station number set to 1.
(i) P+SUNX-SC-HG1_SetOutputMode_R (output logic settings)
When M0 is turned ON, this FB outputs the output logic of the controllers connected to the SC-HG1-C with its station number
set to 1 to D255.
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
174/184