Panasonic SC-HG1 Series Reference Manual page 79

Item
Description of
functions
FB compilation
method
FB behavior
i_bEN input condition
When Execution Command (i_bEN) is turned ON, this FB executes the settings on the controller
specified by Set Controller (i_uSetController) in accordance with the value input to NC Flag
(i_bNCFlag).
If Execution Command (i_bEN) is turned ON with NC Flag (i_bNCFlag) OFF, the setting "NO" is
applied to the controller specified by Set Controller (i_uSetController).
If Execution Command (i_bEN) is turned ON with NC Flag (i_bNCFlag) ON, the setting "NC" is
applied to the controller specified by Set Controller (i_uSetController).
When Execution Command (i_bEN) is turned ON with Read Flag (i_bReadFlag) ON, however, the
output logic settings for all the connected controllers are output to Read Output Mode
(o_uReadOutputMode). In this case, the values input to Set Controller (i_uSetController) and NC
Flag (i_bNCFlag) are ignored and no setting takes place.
Macro type
Pulse execution type (multi-scan execution type)
None
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Description
79/184
WUME-SCHG1IQRFB-1