Panasonic SC-HG1 Series Reference Manual page 146

If a Windows® PC where the target CPU module and GX Works3 are already installed is NOT connected via USB, you
must select I/O Assignment and set various configuration information.
Carefully note that if the settings you entered here differ from the actual system configuration, an error occurs.
Select "RJ71EN71 (CCIEF)" as the module model name.
Figure 1.5.4-4: System parameters (manual setting)
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
146/184